联系万盛 CONTACT
Guangzhou WINSION Door Industry Co., Ltd.
hotline：62243188
fax：82251958
Adderss：Guangzhou Economic and Technological Development Zone Eastern Po Industrial Zone, C-Union Industrial Park, Building B, the first floor
Industrial sliding doors
Industrial sliding doors
Wansheng industrial sliding door design goal is for those who need a strong thermal insulation with good performance and can save space for industrial plant exterior door customers. This industrial sliding door slides up to the ceiling when open, without occupying any space in the room, making the door open completely. The high quality sandwich panel provides excellent insulation, along with a number of optional operations As well as after-sales service organizations, so Wansheng industrial sliding doors to meet the different requirem...
咨询报价全国服务热线：13660108455
Industrial sliding doors
Wansheng industrial sliding door design goal is for those who need a strong thermal insulation with good performance and can save space for industrial plant exterior door customers. This industry
The sliding door slides up to the ceiling when open, does not occupy any space in the house, makes the door completely open, high-quality sandwich-type door provides excellent insulation properties,
With many optional operation and after-sales service organizations, so Wansheng industrial sliding doors to meet the different requirements of customers.
Performance characteristics
Curtain material: double-layer high strength, high toughness, corrosion-resistant aluminum alloy extrusion.
Surface treatment: classic powder coating process, which is characterized by strong durability, anti-aging, anti-corrosion, do not fade, easy to maintain, long as new.
Scope: for high-grade plant external doors.
Opening speed: the average speed of up to 12-18 meters per minute;
Operating principle: multi-joint activities of the door series together, fixed in the guide rail, the door on top of the scroll up and down as the center of rotation.
Driving principle: with a dedicated motor to drive the shutter shaft rotation, to shutter switch, when the motor to set the upper and lower limit automatically stops.
Appearance: the inner and outer surface of the door after special treatment, to meet the appearance of a variety of modern industrial plant requirements.
Wind resistance: through the door to strengthen the internal processing, with other enhanced accessories, Marley industrial doors can withstand the requirements of 12 winds.
Transparency: to provide rectangular or oval-shaped design of double-insulated glass, surrounded by flexible rubber outside the perspective of the window, providing a good light and transparency.
Anti-theft: to provide dedicated door latch and door locks, can be locked from the inside, with a solid door, effective anti-theft anti-theft.
Classification
(Perspective sliding door, as above)
By use can be divided into: industrial sliding doors and perspective to enhance the door two;
Press to open the way can be divided into: manual sliding door and electric sliding door two.
Industrial sliding operation
Lift door operation sub-manual control mode and electric control mode:
1) Manual control: through manual one-time completion of the door to enhance and decline, power outages, the door can be opened manually.
2) electric control mode: (on the basis of manual control) in every door to raise the door next door (inside) are equipped with standard operation button box, by manipulating the button box on the stop button to open, . And automatically stops when the door moves to the set position.
3) manual / automatic switch: the motor is equipped with a clutch release device, when the power can be manually operated by clutch release device, the drive from the manual switch to manual, manual operation of the door opening and closing.
Uses
It is widely used in automobile 4S shop, underground garage, automobile factory, food, chemical, textile, electronics, supermarket, refrigeration, logistics and warehousing etc. It can meet the requirements of high performance logistics and clean places.
Industrial sliding door accessories:
|
|
|
|
Industrial sliding doors video display
Sliding door manufacturers technical parameters:
Door panel size range: the largest width: 12000mm
Height of door opening: 8500mm
Door thickness: 45mm, thermal resistance R = 18.25
Surface: Polyester surface treatment, the color is milky white, apricot, brown (other colors need to be arranged to do).
Track: There are 2 inches (51mm) are all made of 1.5-3mm thick hot-dip galvanized steel plate. There are standard rails, low rails, high lift rails, vertical lift rails and ramp lift rails.
Balance system: external torsion spring balance system, torsion spring working life of 500,000 ~ 1000,000 times the working cycle.
Seal: Bottom U-shaped vinyl seal, antifreeze, moisture and water seepage, side, top, with groove seal seal, door between the joints to convex groove and heat sealing tube seal.
Observation window: According to the needs of a variety of sizes can be matching the observation window.
Driving voltage: single phase 220V 50HZ.
Drive mode: direct shaft drive and indirect chain drive
Output torque: single-phase 50Nm,
Limit mode: mechanical and electronic.
Motor speed: 1400RPM.
Operating speed: 133mm / s (UNI8612 standard).
Number of starts: 100 times / 24 hours
Operating temperature: -25 ℃ ~ +60 ℃
Manual operation: using the control chain to achieve mechanical and electrical clutch, the manual operation.
Wireless remote control: to provide fast, convenient wireless control.
Industrial bearing bracket: can carry heavy load operation.
Control box: 24VAC, one-button control, emergency stop switch electronic lock.
Safety control device: optional air-sense security protection device, infrared security protection device.
Fast shutter door maintenance tips:
Fast shutter doors are now all over the country, experts said that the use of more than one year of the shutter doors to give inspection and maintenance in daily life, but also pay attention to the rapid shutter doors of the maintenance and maintenance.
The following is a quick shutter door maintenance related methods:
First: fast shutter doors security devices;
In addition to the installation of protective devices outside the brake system, respectively, in the door of the track around the bottom of 25CM or at the bottom of a pneumatic safety device. Door in the closing process in the event of a vehicle and pedestrians through the fast door will automatically stop and then run up to full open position. When the safety of optical and airbags in the event of failure to timely repair or replacement; if not timely replacement of the door down in the process of running too fast because it is likely to cause pedestrian and vehicle damage.
Second: power and braking system: the motor power and braking system is the overall focus of the core products of fast door products, is the entire Tang fast door security, efficient and smooth operation of the guarantee. When the brake brake system failure to timely maintenance and replacement;
Such as; brake insensitive, brakes continue to decline after the door, the sound when the brake is loud, there will be a gap when the door stops, etc .; when the above failure, if not timely maintenance and replacement of the contents of the warning if not executed may result in door Sudden drop, damage to the motor or other components and possible personal injury.
In this case,
Third: control the switch system:
Control switch system is fast gate output, close, signal conversion, programming and other major components. Divided into integrated circuit board control chip and independent components of electrical components, electronic components on the use of environmental requirements are higher, in order to ensure fast and efficient door, safe operation so in the daily use of the process to regular product maintenance, When the control system failure to timely replacement and maintenance;
Fourth: Other: such as steel, wind-resistant devices, sealing devices, door structure, interlock devices, emergency stop device, drum roller, limit devices, switching devices are inseparable system, to ensure that all systems Of the normal operation of the normal maintenance and repair is essential.
