~欢迎来到广州万盛门业网站!

The service hotline: 62243188

|

consulting

|
language: English


PRODUCT CENTER

产品中心

产品中心

PRODUCT CENTER

Home>Product>Hydraulic unloading platform>Hydraulic unloading platform

Hydraulic unloading platform

Wansheng hydraulic unloading platform is the use of hydraulic power unit, through the main cylinder will be unloading platform board surface lift, a small fuel tank will launch a small plate, and through the unloading platform weight drop, the small plate ride to the rear of the car to complete the entire action. Electro-hydraulic type is the most commonly used, is also the most widely used unloading platform, its stable performance, simple operation, stable operation, and low maintenance rate, easy to repair.

咨询报价

全国服务热线:13660108455

Hydraulic unloading platform



Wansheng hydraulic unloading platform is the use of hydraulic power unit, through the main cylinder will be unloading platform board surface lift, a small fuel tank will launch a small plate, and through the unloading platform weight drop, the small plate ride to the rear of the car to complete the entire action. Electro-hydraulic type is the most commonly used, is also the most widely used unloading platform, its stable performance, simple operation, stable operation, and low maintenance rate, easy to repair.


Hydraulic unloading platform manufacturers structure Technical performance:



1, the platform structure using the overall platform surface structure design, the surface of high-strength tensile pattern plate countertop. The bottom of the panel skeleton using a unique "I" steel support structure, the effective decomposition of the distribution of force to reduce skeleton torque. Static load from 8 tons to a maximum of 15 tons, dynamic load from 5 tons to a maximum of 10 tons. 2, open-type loose-leaf joint structure by the high-tensile pattern steel plate made of a diameter of 25-30mm (1 "-1.2") of high-strength galvanized steel shaft connection. Open-leaf joint than the traditional tubular welded joints, an increase of welding area of 300%, the force area increased by 2.5 times, so that the loose-leaf pull up to 4 times the small increase in the bearing capacity; and easier maintenance.
3, open the base easy to pit cleaning and routine maintenance.
4, the power unit from the integrated hydraulic system and hydraulic pump station. Power unit installed in the unloading platform on the base, the installation position is higher than the pit level, away from garbage and debris.
5, power supply configuration We can provide two power configurations for customers to choose: 380V / 50Hz / 0.75Kw and 220V / 50Hz / 1.1Kw; are equipped with built-in anti-overload motor.
6, integrated hydraulic system main cylinder diameter 63mm (2-1 / 2 "), auxiliary cylinder diameter 50mm (2"). Suitable for an ambient temperature of 40 ° C (100 ° F). Single pipe connections extend the life of fully sealed hydraulic and hydraulic pumping stations, reducing maintenance costs.
7, the control panel one-button switch, easy to operate. Interlocks are provided between the berths to further enhance safety.
8, the independent leg structure patented design of 28 tons (60,600 lbs.) Support leg structure can be unloaded in the process, when the truck suddenly left the platform unloading area, support legs and forklifts can keep the goods in the horizontal plane, the maximum reduction Accidents occur, to ensure the safety of the operator.
9, anti-pinch design unloading platforms on both sides of the anti-pinch board, along the side of the yellow / black diagonal bar, even in the large table up to the highest time, side panels can also ensure complete closure of the side, can effectively avoid Crushing the risk of toes, people, forklifts, goods are fully protected.
10, assembly and maintenance support rods unloading platform with assembly maintenance support rods, in order to maintain the equipment maintenance or pit cleaning, to support the unloading platform, to ensure the safety of the platform operator.
11, floating adjustment When the loose-leaf pull a small ride in the tail of the truck, you can vertical deflection, adjust the range of 100mm (4 ") or less.
12, anti-collision rubber unloading platform front end is equipped with two heavy-duty crash rubber, model B300-250F, 250mm x 300mm (10 "x 12").

Hydraulic unloading platform:









Hydraulic unloading platform product video to be uploaded

Hydraulic unloading platform product configuration
1, the platform structure using the overall platform surface structure design, the surface of high-strength tensile pattern plate countertop. The bottom of the panel skeleton using a unique "I" steel support structure, the effective decomposition of the distribution of force to reduce skeleton torque. Static load from 8 tons to a maximum of 15 tons, dynamic load from 5 tons to a maximum of 10 tons.
2, open-type loose-leaf joint structure by the high-tensile pattern steel plate made by a diameter of 25-30mm (1 "-1.2") of high-strength galvanized steel shaft connection. Open-leaf joint than the traditional tubular welded joints, an increase of welding area of 300%, the force area increased by 2.5 times, so that the loose-leaf pull up to 4 times the small increase in the bearing capacity; and easier maintenance.
3, open the base easy to pit cleaning and routine maintenance.
4, the power unit from the integrated hydraulic system and hydraulic pump station. Power unit installed in the unloading platform on the base, the installation position is higher than the pit level, away from garbage and debris.
5, power supply configuration We can provide two power configurations for customers to choose: 380V / 50Hz / 0.75Kw and 220V / 50Hz / 1.1Kw; are equipped with built-in anti-overload motor.
6, integrated hydraulic system main cylinder diameter 63mm (2-1 / 2 "), auxiliary cylinder diameter 50mm (2"). Suitable for an ambient temperature of 40 ° C (100 ° F). Single pipe connections extend the life of fully sealed hydraulic and hydraulic pumping stations, reducing maintenance costs.
7, the control panel one-button switch, easy to operate. Interlocks are provided between the berths to further enhance safety.
8, the independent leg structure Patented design of 28 tons (60,600 lbs.) Support leg structure, you can unload the process, when the truck suddenly left the platform unloading area, support legs and forklift trucks can keep the goods in the horizontal plane, the maximum reduction Accidents occur, to ensure the safety of the operator.
9, anti-pinch design unloading platforms on both sides of the anti-pinch board, along the side of the yellow / black diagonal bar, even in the large table up to the highest time, side panels can also ensure complete closure of the side, can effectively avoid Crushing the risk of toes, people, forklifts, goods are fully protected.
10, assembly and maintenance support rod unloading platform with assembly maintenance support rod, so that maintenance or pit cleaning equipment, to support the unloading platform to ensure that the platform operator's safety.
11, floating adjustment When the loose-leaf pull a small ride in the tail of the truck, you can vertical deflection, adjust the range of 100mm (4 ") or less.
12, anti-collision rubber unloading platform front end is equipped with two heavy-duty crash rubber, model B300-250F, 250mm x 300mm (10 "x 12").

Hydraulic unloading platform maintenance tips to upload!


Contact us for more services

Contact